# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#  Copyright 1999-2009 ImageMagick Studio LLC, a non-profit organization
#  dedicated to making software imaging solutions freely available.
#
#  You may not use this file except in compliance with the License.  You may
#  obtain a copy of the License at
#
#    http://www.wizards-toolkit.org/script/license.php
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#
#  Top-Level Makefile for building the Wizard's Toolkit.

#  Copyright 1999-2009 ImageMagick Studio LLC, a non-profit organization
#  dedicated to making software imaging solutions freely available.
#
#  You may not use this file except in compliance with the License.  You may
#  obtain a copy of the License at
#
#    http://www.wizards-toolkit.org/script/license.php
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#
#  Makefile for the Wizard's Toolkit configuration files.

#  Copyright 1999-2009 ImageMagick Studio LLC, a non-profit organization
#  dedicated to making software imaging solutions freely available.
#
#  You may not use this file except in compliance with the License.
#  obtain a copy of the License at
#
#    http://www.wizards-toolkit.org/script/license.php
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#
#  Makefile for building Wizard's Toolkit library.

# Copyright 1999-2009 ImageMagick Studio LLC, a non-profit organization
# dedicated to making software imaging solutions freely available.
#
# You may not use this file except in compliance with the License.
# obtain a copy of the License at
#
#   http://www.wizards-toolkit.org/script/license.php
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
#  Makefile for Wizard's Toolkit tests invoked via the C API.

#  Copyright 1999-2009 ImageMagick Studio LLC, a non-profit organization
#  dedicated to making software imaging solutions freely available.
#
#  You may not use this file except in compliance with the License.  You may
#  obtain a copy of the License at
#
#    http://www.wizards-toolkit.org/script/license.php
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#
#  Makefile for building ImageMagick utilities.





VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
bin_PROGRAMS = $(am__EXEEXT_1)
XFAIL_TESTS = $(am__EXEEXT_3)
check_PROGRAMS = $(am__EXEEXT_2)
DIST_COMMON = $(am__configure_deps) $(include_HEADERS) \
	$(noinst_HEADERS) $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/WizardsToolkit.spec.in $(srcdir)/config/Makefile.am \
	$(srcdir)/m4/Makefile.am $(srcdir)/tests/Makefile.am \
	$(srcdir)/utilities/Makefile.am $(srcdir)/wizard.sh.in \
	$(srcdir)/wizard/Makefile.am \
	$(top_srcdir)/config/WizardsToolkit.dox.in \
	$(top_srcdir)/config/config.h.in \
	$(top_srcdir)/config/configure.xml.in $(top_srcdir)/configure \
	$(top_srcdir)/utilities/cipher-info.1.in \
	$(top_srcdir)/utilities/decipher.1.in \
	$(top_srcdir)/utilities/digest.1.in \
	$(top_srcdir)/utilities/encipher.1.in \
	$(top_srcdir)/utilities/keyring.1.in \
	$(top_srcdir)/windows/WizardsToolkit.bat.in \
	$(top_srcdir)/wizard/WizardsToolkit-config.in \
	$(top_srcdir)/wizard/WizardsToolkit.pc.in \
	$(top_srcdir)/wizard/version.h.in $(wizardinc_HEADERS) \
	ChangeLog config/compile config/config.guess config/config.sub \
	config/depcomp config/install-sh config/ltmain.sh \
	config/missing config/mkinstalldirs
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_compile_warnings.m4 \
	$(top_srcdir)/m4/ac_func_fseeko.m4 \
	$(top_srcdir)/m4/acx_pthread.m4 \
	$(top_srcdir)/m4/ax_prefix_config_h.m4 \
	$(top_srcdir)/m4/cxx_have_bool.m4 \
	$(top_srcdir)/m4/cxx_have_lstring.m4 \
	$(top_srcdir)/m4/cxx_have_namespaces.m4 \
	$(top_srcdir)/m4/cxx_have_std_libs.m4 \
	$(top_srcdir)/m4/cxx_have_std_namespace.m4 \
	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \
	$(top_srcdir)/m4/wizard_check_pthread_lib.m4 \
	$(top_srcdir)/m4/wizard_func_mmap_fileio.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES = config/configure.xml config/WizardsToolkit.dox \
	wizard.sh utilities/cipher-info.1 utilities/decipher.1 \
	utilities/digest.1 utilities/encipher.1 utilities/keyring.1 \
	windows/WizardsToolkit.bat wizard/version.h \
	wizard/WizardsToolkit-config wizard/WizardsToolkit.pc \
	WizardsToolkit.spec
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
	"$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" \
	"$(DESTDIR)$(configlibdir)" "$(DESTDIR)$(configsharedir)" \
	"$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgconfigdir)" \
	"$(DESTDIR)$(includedir)" "$(DESTDIR)$(wizardincdir)"
LTLIBRARIES = $(lib_LTLIBRARIES)
am__DEPENDENCIES_1 =
wizard_libWizardsToolkit_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
am__wizard_libWizardsToolkit_la_SOURCES_DIST = wizard/aes.c \
	wizard/aes.h wizard/authenticate.c wizard/authenticate.h \
	wizard/blob.c wizard/blob.h wizard/blob-private.h \
	wizard/bzip.c wizard/bzip.h wizard/cipher.c wizard/cipher.h \
	wizard/client.c wizard/client.h wizard/configure.c \
	wizard/configure.h wizard/hashmap.h wizard/crc64.c \
	wizard/crc64.h wizard/entropy.c wizard/entropy.h \
	wizard/exception.c wizard/exception.h \
	wizard/exception-private.h wizard/file.c wizard/file.h \
	wizard/hash.c wizard/hash.h wizard/hashmap.c wizard/hmac.c \
	wizard/hmac.h wizard/key.c wizard/key.h wizard/keyring.c \
	wizard/keyring.h wizard/log.c wizard/log.h wizard/magick.c \
	wizard/magick.h wizard/md5.c wizard/md5.h wizard/memory.c \
	wizard/memory_.h wizard/mime.c wizard/mime.h \
	wizard/mime-private.h wizard/nt-base.h wizard/option.c \
	wizard/option.h wizard/passphrase.c wizard/passphrase.h \
	wizard/random.c wizard/random_.h wizard/resource.c \
	wizard/resource_.h wizard/sanitize.c wizard/sanitize.h \
	wizard/secret.c wizard/secret.h wizard/semaphore.c \
	wizard/semaphore.h wizard/serpent.c wizard/serpent.h \
	wizard/signature.c wizard/signature.h wizard/sha1.c \
	wizard/sha1.h wizard/sha224.c wizard/sha224.h wizard/sha256.c \
	wizard/sha256.h wizard/sha384.c wizard/sha384.h \
	wizard/sha512.c wizard/sha512.h wizard/splay-tree.c \
	wizard/splay-tree.h wizard/string.c wizard/string_.h \
	wizard/studio.h wizard/thread.c wizard/thread_.h \
	wizard/thread-private.h wizard/timer.c wizard/timer.h \
	wizard/token.c wizard/token.h wizard/twofish.c \
	wizard/twofish.h wizard/utility.c wizard/utility.h \
	wizard/version.c wizard/version.h wizard/wizard.c \
	wizard/wizard.h wizard/wizard-type.h wizard/wizard-config.h \
	wizard/WizardsToolkit.h wizard/xml-tree.c wizard/xml-tree.h \
	wizard/zip.c wizard/zip.h wizard/nt-base.c
am__dirstamp = $(am__leading_dot)dirstamp
am__objects_1 = wizard/aes.lo wizard/authenticate.lo wizard/blob.lo \
	wizard/bzip.lo wizard/cipher.lo wizard/client.lo \
	wizard/configure.lo wizard/crc64.lo wizard/entropy.lo \
	wizard/exception.lo wizard/file.lo wizard/hash.lo \
	wizard/hashmap.lo wizard/hmac.lo wizard/key.lo \
	wizard/keyring.lo wizard/log.lo wizard/magick.lo wizard/md5.lo \
	wizard/memory.lo wizard/mime.lo wizard/option.lo \
	wizard/passphrase.lo wizard/random.lo wizard/resource.lo \
	wizard/sanitize.lo wizard/secret.lo wizard/semaphore.lo \
	wizard/serpent.lo wizard/signature.lo wizard/sha1.lo \
	wizard/sha224.lo wizard/sha256.lo wizard/sha384.lo \
	wizard/sha512.lo wizard/splay-tree.lo wizard/string.lo \
	wizard/thread.lo wizard/timer.lo wizard/token.lo \
	wizard/twofish.lo wizard/utility.lo wizard/version.lo \
	wizard/wizard.lo wizard/xml-tree.lo wizard/zip.lo
@WIN32_NATIVE_BUILD_TRUE@am__objects_2 = wizard/nt-base.lo
am_wizard_libWizardsToolkit_la_OBJECTS = $(am__objects_1) \
	$(am__objects_2)
wizard_libWizardsToolkit_la_OBJECTS =  \
	$(am_wizard_libWizardsToolkit_la_OBJECTS)
AM_V_lt = $(am__v_lt_$(V))
am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
am__v_lt_0 = --silent
wizard_libWizardsToolkit_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(AM_CFLAGS) $(CFLAGS) $(wizard_libWizardsToolkit_la_LDFLAGS) \
	$(LDFLAGS) -o $@
am__EXEEXT_1 = utilities/encipher$(EXEEXT) utilities/decipher$(EXEEXT) \
	utilities/cipher-info$(EXEEXT) utilities/keyring$(EXEEXT) \
	utilities/digest$(EXEEXT)
am__EXEEXT_2 = tests/validate$(EXEEXT)
PROGRAMS = $(bin_PROGRAMS)
am_tests_validate_OBJECTS = tests/tests_validate-validate.$(OBJEXT)
tests_validate_OBJECTS = $(am_tests_validate_OBJECTS)
tests_validate_DEPENDENCIES = $(WIZARD_LIBS)
am_utilities_cipher_info_OBJECTS = utilities/cipher-info.$(OBJEXT) \
	utilities/content.$(OBJEXT) utilities/utility.$(OBJEXT)
utilities_cipher_info_OBJECTS = $(am_utilities_cipher_info_OBJECTS)
utilities_cipher_info_DEPENDENCIES = $(WIZARD_LIBS)
utilities_cipher_info_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(AM_CFLAGS) $(CFLAGS) $(utilities_cipher_info_LDFLAGS) \
	$(LDFLAGS) -o $@
am_utilities_decipher_OBJECTS = utilities/decipher.$(OBJEXT) \
	utilities/content.$(OBJEXT) utilities/utility.$(OBJEXT)
utilities_decipher_OBJECTS = $(am_utilities_decipher_OBJECTS)
utilities_decipher_DEPENDENCIES = $(WIZARD_LIBS)
utilities_decipher_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(AM_CFLAGS) $(CFLAGS) $(utilities_decipher_LDFLAGS) \
	$(LDFLAGS) -o $@
am_utilities_digest_OBJECTS = utilities/digest.$(OBJEXT) \
	utilities/content.$(OBJEXT) utilities/utility.$(OBJEXT)
utilities_digest_OBJECTS = $(am_utilities_digest_OBJECTS)
utilities_digest_DEPENDENCIES = $(WIZARD_LIBS)
utilities_digest_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(AM_CFLAGS) $(CFLAGS) $(utilities_digest_LDFLAGS) $(LDFLAGS) \
	-o $@
am_utilities_encipher_OBJECTS = utilities/encipher.$(OBJEXT) \
	utilities/content.$(OBJEXT) utilities/utility.$(OBJEXT)
utilities_encipher_OBJECTS = $(am_utilities_encipher_OBJECTS)
utilities_encipher_DEPENDENCIES = $(WIZARD_LIBS)
utilities_encipher_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(AM_CFLAGS) $(CFLAGS) $(utilities_encipher_LDFLAGS) \
	$(LDFLAGS) -o $@
am_utilities_keyring_OBJECTS = utilities/keyring.$(OBJEXT) \
	utilities/content.$(OBJEXT) utilities/utility.$(OBJEXT)
utilities_keyring_OBJECTS = $(am_utilities_keyring_OBJECTS)
utilities_keyring_DEPENDENCIES = $(WIZARD_LIBS)
utilities_keyring_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
	$(AM_CFLAGS) $(CFLAGS) $(utilities_keyring_LDFLAGS) $(LDFLAGS) \
	-o $@
SCRIPTS = $(bin_SCRIPTS)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config
depcomp = $(SHELL) $(top_srcdir)/config/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_$(V))
am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
am__v_CC_0 = @echo "  CC    " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_$(V))
am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
am__v_CCLD_0 = @echo "  CCLD  " $@;
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
SOURCES = $(wizard_libWizardsToolkit_la_SOURCES) \
	$(tests_validate_SOURCES) $(utilities_cipher_info_SOURCES) \
	$(utilities_decipher_SOURCES) $(utilities_digest_SOURCES) \
	$(utilities_encipher_SOURCES) $(utilities_keyring_SOURCES)
DIST_SOURCES = $(am__wizard_libWizardsToolkit_la_SOURCES_DIST) \
	$(tests_validate_SOURCES) $(utilities_cipher_info_SOURCES) \
	$(utilities_decipher_SOURCES) $(utilities_digest_SOURCES) \
	$(utilities_encipher_SOURCES) $(utilities_keyring_SOURCES)
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man_MANS)
DATA = $(configlib_DATA) $(configshare_DATA) $(doc_DATA) \
	$(pkgconfig_DATA)
HEADERS = $(include_HEADERS) $(noinst_HEADERS) $(wizardinc_HEADERS)
ETAGS = etags
CTAGS = ctags
# If stdout is a non-dumb tty, use colors.  If test -t is not supported,
# then this fails; a conservative approach.  Of course do not redirect
# stdout here, just stderr.
am__tty_colors = \
red=; grn=; lgn=; blu=; std=; \
test "X$(AM_COLOR_TESTS)" != Xno \
&& test "X$$TERM" != Xdumb \
&& { test "X$(AM_COLOR_TESTS)" = Xalways || test -t 1 2>/dev/null; } \
&& { \
  red=''; \
  grn=''; \
  lgn=''; \
  blu=''; \
  std=''; \
}
# Restructured Text title and section.
am__rst_title = sed 's/.*/   &   /;h;s/./=/g;p;x;p;g;p;s/.*//'
am__rst_section = sed 'p;s/./=/g;p;g'
# Put stdin (possibly several lines separated by ".  ") in a box.
am__text_box = $(AWK) '{				\
  n = split($$0, lines, "\\.  "); max = 0;		\
  for (i = 1; i <= n; ++i)				\
    if (max < length(lines[i]))				\
      max = length(lines[i]);				\
  for (i = 0; i < max; ++i) line = line "=";		\
  print line;						\
  for (i = 1; i <= n; ++i) if (lines[i]) print lines[i];\
  print line;						\
}'
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL).  This contradicts POSIX.  Work around the problem
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log, and passes
# TESTS_ENVIRONMENT.  Save and restore TERM around use of
# TESTS_ENVIRONMENT, in case that unsets it.
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
srcdir=$(srcdir); export srcdir;			\
rm -f $@-t;						\
trap 'st=$$?; rm -f '\''$(abs_builddir)/$@-t'\''; (exit $$st); exit $$st' \
  1 2 13 15;						\
am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;		\
test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?;	\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; __SAVED_TERM=$$TERM;		\
$(TESTS_ENVIRONMENT)
RECHECK_LOGS = $(TEST_LOGS)
AM_RECURSIVE_TARGETS = check check-html recheck recheck-html
am__EXEEXT_3 =
TEST_SUITE_LOG = test-suite.log
TEST_SUITE_HTML = $(TEST_SUITE_LOG:.log=.html)
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.sh.log=.log)
SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
TEST_LOGS_TMP = $(TEST_LOGS:.log=.log-t)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d "$(distdir)" \
    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr "$(distdir)"; }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 $(distdir).tar.xz \
	$(distdir).zip
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BIN_DIR = @BIN_DIR@
BZLIB_LIBS = @BZLIB_LIBS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CCMALLOCDelegate = @CCMALLOCDelegate@
CFLAGS = @CFLAGS@
CONFIGURE_ARGS = @CONFIGURE_ARGS@
CONFIGURE_PATH = @CONFIGURE_PATH@
CONFIG_STATUS_DEPENDENCIES = @CONFIG_STATUS_DEPENDENCIES@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CVS_BRANCH_TAG = @CVS_BRANCH_TAG@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATA_DIR = @DATA_DIR@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DIRSEP = @DIRSEP@
DISTCHECK_CONFIG_FLAGS = @DISTCHECK_CONFIG_FLAGS@
DLLTOOL = @DLLTOOL@
DOCUMENTATION_PATH = @DOCUMENTATION_PATH@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXECUTABLE_PATH = @EXECUTABLE_PATH@
EXEC_PREFIX_DIR = @EXEC_PREFIX_DIR@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GDI32_LIBS = @GDI32_LIBS@
GOMP_LIBS = @GOMP_LIBS@
GREP = @GREP@
INCLUDE_DIR = @INCLUDE_DIR@
INFO_DIR = @INFO_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INT16_T = @INT16_T@
INT32_T = @INT32_T@
INT64_T = @INT64_T@
INT8_T = @INT8_T@
LD = @LD@
LDFLAGS = @LDFLAGS@
LFS_CPPFLAGS = @LFS_CPPFLAGS@
LIBEXEC_DIR = @LIBEXEC_DIR@
LIBOBJS = @LIBOBJS@
LIBRARY_EXTRA_CPPFLAGS = @LIBRARY_EXTRA_CPPFLAGS@
LIBRARY_PATH = @LIBRARY_PATH@
LIBS = @LIBS@
LIBSTDCLDFLAGS = @LIBSTDCLDFLAGS@
LIBTOOL = @LIBTOOL@

# Automatically reconfigure libtool
LIBTOOL_DEPS = @LIBTOOL_DEPS@
LIB_DIR = @LIB_DIR@
LIB_DL = @LIB_DL@
LIPO = @LIPO@
LN_S = @LN_S@
LOCALSTATE_DIR = @LOCALSTATE_DIR@
LTCXXLIBOPTS = @LTCXXLIBOPTS@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MAN_DIR = @MAN_DIR@
MATH_LIBS = @MATH_LIBS@
MKDIR_P = @MKDIR_P@
MODULE_EXTRA_CPPFLAGS = @MODULE_EXTRA_CPPFLAGS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OLDINCLUDE_DIR = @OLDINCLUDE_DIR@
OPENMP_CFLAGS = @OPENMP_CFLAGS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
P7ZIP = @P7ZIP@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_CHANGE_DATE = @PACKAGE_CHANGE_DATE@
PACKAGE_LIB_SUBVERSION = @PACKAGE_LIB_SUBVERSION@
PACKAGE_LIB_VERSION = @PACKAGE_LIB_VERSION@
PACKAGE_LIB_VERSION_NUMBER = @PACKAGE_LIB_VERSION_NUMBER@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_RELEASE = @PACKAGE_RELEASE@
PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKG_CONFIG = @PKG_CONFIG@
POW_LIB = @POW_LIB@
PREFIX_DIR = @PREFIX_DIR@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_CXX = @PTHREAD_CXX@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
RPM = @RPM@
SBIN_DIR = @SBIN_DIR@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHAREDSTATE_DIR = @SHAREDSTATE_DIR@
SHARE_CONFIGURE_PATH = @SHARE_CONFIGURE_PATH@
SHARE_PATH = @SHARE_PATH@
SHELL = @SHELL@
STRIP = @STRIP@
SYSCONF_DIR = @SYSCONF_DIR@
TAR = @TAR@
THREAD_LIBS = @THREAD_LIBS@
UINT16_T = @UINT16_T@
UINT32_T = @UINT32_T@
UINT64_T = @UINT64_T@
UINT8_T = @UINT8_T@
UINTMAX_T = @UINTMAX_T@
UINTPTR_T = @UINTPTR_T@
UMEM_LIBS = @UMEM_LIBS@
VERSION = @VERSION@
WIZARD_CFLAGS = @WIZARD_CFLAGS@
WIZARD_CODER_MODULE_PATH = @WIZARD_CODER_MODULE_PATH@
WIZARD_CONFIGURE_BUILD_PATH = @WIZARD_CONFIGURE_BUILD_PATH@
WIZARD_CONFIGURE_SRC_PATH = @WIZARD_CONFIGURE_SRC_PATH@
WIZARD_CPPFLAGS = @WIZARD_CPPFLAGS@
WIZARD_DEP_LIBS = @WIZARD_DEP_LIBS@
WIZARD_FILTER_MODULE_PATH = @WIZARD_FILTER_MODULE_PATH@
WIZARD_LDFLAGS = @WIZARD_LDFLAGS@
WIZARD_LIBRARY_AGE = @WIZARD_LIBRARY_AGE@
WIZARD_LIBRARY_CURRENT = @WIZARD_LIBRARY_CURRENT@
WIZARD_LIBRARY_REVISION = @WIZARD_LIBRARY_REVISION@
WIZARD_LIBS = wizard/libWizardsToolkit.la
WIZARD_LIB_VERSION = @WIZARD_LIB_VERSION@
WIZARD_LIB_VERSION_NUMBER = @WIZARD_LIB_VERSION_NUMBER@
WIZARD_LIB_VERSION_TEXT = @WIZARD_LIB_VERSION_TEXT@
WIZARD_PCFLAGS = @WIZARD_PCFLAGS@
WinPathScript = @WinPathScript@
X_CFLAGS = @X_CFLAGS@
ZIP = @ZIP@
ZLIB_LIBS = @ZLIB_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@

# Architecture independent data files installed in the package's data directory
docdir = $(SHARE_PATH)
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
windows_font_dir = @windows_font_dir@
AUTOMAKE_OPTIONS = 1.11 subdir-objects parallel-tests color-tests dist-zip dist-bzip2 dist-xz  foreign
topincludedir = @includedir@
AM_CPPFLAGS = -I$(top_builddir) -I$(top_srcdir)
ACLOCAL_AMFLAGS = -I m4

# Options to pass when running configure in the distcheck target.
#
# We want to preserve user-provided option variables so the same
# compiler, headers, and libraries are used as for a normal build.
DISTCHECK_CONFIGURE_FLAGS = $(DISTCHECK_CONFIG_FLAGS)
CLEANFILES = \
	$(BZIP_CLEANFILES) \
	$(ZIP_CLEANFILES) \
	$(TESTS_CLEANFILES) \
	$(UTILITIES_CLEANFILES)


# Binary scripts
bin_SCRIPTS = \
	$(WIZARD_BIN_SCRPTS) 

include_HEADERS = 

# Headers which are not installed but which are distributed
noinst_HEADERS = \
	$(BZIP_LIBS_NOINST_HDRS) \
	$(ZIP_LIBS_NOINST_HDRS) \
	$(WIZARD_NOINST_HDRS)

@WIN32_NATIVE_BUILD_FALSE@SRCDIR = "$(srcdir)/"
@WIN32_NATIVE_BUILD_TRUE@SRCDIR = '$(shell @WinPathScript@ $(srcdir)/)'

# Environment parameters to be used during tests
TESTS_ENVIRONMENT = \
  ENCIPHER="$(MEMCHECK) @abs_top_builddir@/utilities/encipher" \
  DECIPHER="$(MEMCHECK) @abs_top_builddir@/utilities/decipher" \
  CIPHERINFO="$(MEMCHECK) @abs_top_builddir@/utilities/cipher-info" \
  KEYRING="$(MEMCHECK) @abs_top_builddir@/utilities/keyring" \
  DIGEST="$(MEMCHECK) @abs_top_builddir@/utilities/digest" \
  VALIDATE="$(MEMCHECK) @abs_top_builddir@/tests/validate" \
	LD_LIBRARY_PATH="@abs_top_builddir@/wizard/.libs:${LD_LIBRARY_PATH}" \
	WIZARD_CODER_MODULE_PATH='@WIZARD_CODER_MODULE_PATH@' \
	WIZARD_CONFIGURE_PATH='@WIZARD_CONFIGURE_BUILD_PATH@@DIRSEP@@WIZARD_CONFIGURE_SRC_PATH@' \
	WIZARD_FILTER_MODULE_PATH='@WIZARD_FILTER_MODULE_PATH@' \
	MAKE="$(MAKE)" \
	MAKEFLAGS="$(MAKEFLAGS)" \
	MEMCHECK="$(MEMCHECK)" \
	PATH="@abs_top_builddir@/utilities:${PATH}" \
	SRCDIR=$(SRCDIR)


# Test extensions
TEST_EXTENSIONS = .sh

# Tests to run
TESTS = \
	$(TESTS_TESTS) \
	$(UTILITIES_TESTS)

TOP_EXTRA_DIST = \
  AUTHORS.txt \
	README.txt \
	QuickStart.txt \
	ChangeLog \
	LICENSE \
	NOTICE \
	NEWS.txt \
	index.html \
	version.sh \
	winpath.sh \
	wizard.sh.in


# Additional files to distribute
EXTRA_DIST = \
	$(TOP_EXTRA_DIST) \
	$(CONFIG_EXTRA_DIST) \
	$(WIZARD_EXTRA_DIST) \
	$(BZIP_EXTRA_DIST) \
	$(ZIP_EXTRA_DIST) \
	$(TESTS_EXTRA_DIST) \
	$(UTILITIES_EXTRA_DIST) 

lib_LTLIBRARIES = $(WIZARD_LIBS) $(BZIP_LIBS) $(ZIP_LIBS)
M4_EXTRA_DIST = \
  ac_compile_warnings.m4 \
  ac_func_fseeko.m4 \
  ac_libtools_tags.m4 \
  ac_prog_perl_version.m4 \
  acx_pthread.m4 \
  ax_prefix_config_h.m4 \
  cxx_have_bool.m4 \
  cxx_have_lstring.m4 \
  cxx_have_namespaces.m4 \
  cxx_have_std_libs.m4 \
  cxx_have_std_namespace.m4 \
  libtool.m4 \
  ltdl.m4 \
  magick_check_pthread_lib.m4 \
  magick_func_mmap_fileio.m4 \
  Makefile.am


# Where architecture-independent configuration files get installed
# (share/ImageMagick-version)
configsharedir = $(SHARE_CONFIGURE_PATH)
configshare_DATA = \
	config/log.xml \
	config/mime.xml


# Where architecture-dependent configuration files get installed
# (lib/ImageMagick-version)
configlibdir = $(CONFIGURE_PATH)
configlib_DATA = \
	config/configure.xml 

CONFIG_EXTRA_DIST = \
  config/configure.xml \
  config/config.h.in \
  config/log.xml \
  config/mime.c \
  config/mime.xml

wizardincdir = $(topincludedir)/WizardsToolkit/wizard

# Headers which are installed
wizardinc_HEADERS = \
	$(WIZARD_INCLUDE_HDRS)

WIZARD_BIN_SCRPTS = \
  wizard/WizardsToolkit-config

WIZARD_PKGCONFIG = \
  wizard/WizardsToolkit.pc

WIZARD_MANS = \
  wizard/WizardsToolkit-config.1

wizard_libWizardsToolkit_la_SOURCES = $(WIZARD_BASE_SRCS) $(WIZARD_PLATFORM_SRCS)
wizard_libWizardsToolkit_la_LIBADD = $(WIZARD_DEP_LIBS)
wizard_libWizardsToolkit_la_LDFLAGS = -no-undefined -export-symbols-regex ".*" \
  -version-info \
  $(WIZARD_LIBRARY_CURRENT):$(WIZARD_LIBRARY_REVISION):$(WIZARD_LIBRARY_AGE)


# Library base sources
WIZARD_BASE_SRCS = \
  wizard/aes.c \
  wizard/aes.h \
  wizard/authenticate.c \
  wizard/authenticate.h \
  wizard/blob.c \
  wizard/blob.h \
  wizard/blob-private.h \
  wizard/bzip.c \
  wizard/bzip.h \
  wizard/cipher.c \
  wizard/cipher.h \
  wizard/client.c \
  wizard/client.h \
  wizard/configure.c \
  wizard/configure.h \
  wizard/hashmap.h \
  wizard/crc64.c \
  wizard/crc64.h \
  wizard/entropy.c \
  wizard/entropy.h \
  wizard/exception.c \
  wizard/exception.h \
  wizard/exception-private.h \
  wizard/file.c \
  wizard/file.h \
  wizard/hash.c \
  wizard/hash.h \
  wizard/hashmap.c \
  wizard/hashmap.h \
  wizard/hmac.c \
  wizard/hmac.h \
  wizard/key.c \
  wizard/key.h \
  wizard/keyring.c \
  wizard/keyring.h \
  wizard/log.c \
  wizard/log.h \
  wizard/magick.c \
  wizard/magick.h \
  wizard/md5.c \
  wizard/md5.h \
  wizard/memory.c \
  wizard/memory_.h \
  wizard/mime.c \
  wizard/mime.h \
  wizard/mime-private.h \
  wizard/nt-base.h \
  wizard/option.c \
  wizard/option.h \
  wizard/passphrase.c \
  wizard/passphrase.h \
  wizard/option.h \
  wizard/random.c \
  wizard/random_.h \
  wizard/resource.c \
  wizard/resource_.h \
  wizard/sanitize.c \
  wizard/sanitize.h \
  wizard/secret.c \
  wizard/secret.h \
  wizard/semaphore.c \
  wizard/semaphore.h \
  wizard/serpent.c \
  wizard/serpent.h \
  wizard/signature.c \
  wizard/signature.h \
  wizard/sha1.c \
  wizard/sha1.h \
  wizard/sha224.c \
  wizard/sha224.h \
  wizard/sha256.c \
  wizard/sha256.h \
  wizard/sha384.c \
  wizard/sha384.h \
  wizard/sha512.c \
  wizard/sha512.h \
  wizard/splay-tree.c \
  wizard/splay-tree.h \
  wizard/string.c \
  wizard/string_.h \
  wizard/studio.h \
  wizard/thread.c \
  wizard/thread_.h \
  wizard/thread-private.h \
  wizard/timer.c \
  wizard/timer.h \
  wizard/token.c \
  wizard/token.h \
  wizard/twofish.c \
  wizard/twofish.h \
  wizard/utility.c \
  wizard/utility.h \
  wizard/version.c \
  wizard/version.h \
  wizard/wizard.c \
  wizard/wizard.h \
  wizard/wizard-type.h \
  wizard/wizard-config.h \
  wizard/WizardsToolkit.h \
  wizard/xml-tree.c \
  wizard/xml-tree.h \
  wizard/zip.c \
  wizard/zip.h 

@CYGWIN_BUILD_FALSE@@WIN32_NATIVE_BUILD_FALSE@WIZARD_PLATFORM_SRCS = 
@CYGWIN_BUILD_TRUE@@WIN32_NATIVE_BUILD_FALSE@WIZARD_PLATFORM_SRCS = 
@WIN32_NATIVE_BUILD_TRUE@WIZARD_PLATFORM_SRCS = \
@WIN32_NATIVE_BUILD_TRUE@  wizard/nt-base.c \
@WIN32_NATIVE_BUILD_TRUE@  wizard/nt-base.h

WIZARD_INCLUDE_HDRS = \
  wizard/authenticate.h \
  wizard/blob.h \
  wizard/bzip.h \
  wizard/cipher.h \
  wizard/client.h \
  wizard/configure.h \
  wizard/entropy.h \
  wizard/exception.h \
  wizard/file.h \
  wizard/hash.h \
  wizard/hashmap.h \
  wizard/hmac.h \
  wizard/key.h \
  wizard/keyring.h \
  wizard/log.h \
  wizard/magick.h \
  wizard/md5.c \
  wizard/md5.h \
  wizard/memory_.h \
  wizard/mime.h \
  wizard/option.h \
  wizard/passphrase.h \
  wizard/random_.h \
  wizard/resource_.h \
  wizard/sanitize.h \
  wizard/secret.h \
  wizard/semaphore.h \
  wizard/splay-tree.h \
  wizard/string_.h \
  wizard/thread_.h \
  wizard/timer.h \
  wizard/token.h \
  wizard/utility.h \
  wizard/version.h \
  wizard/wizard.h \
  wizard/wizard-type.h \
  wizard/wizard-config.h \
  wizard/WizardsToolkit.h \
  wizard/xml-tree.h\
  wizard/zip.h 

WIZARD_NOINST_HDRS = \
  wizard/aes.h \
  wizard/blob-private.h \
  wizard/crc64.h \
  wizard/exception-private.h \
  wizard/mime-private.h \
  wizard/serpent.h \
  wizard/sha1.h \
  wizard/sha224.h \
  wizard/sha256.h \
  wizard/sha384.h \
  wizard/sha512.h \
  wizard/studio.h \
  wizard/thread-private.h \
  wizard/twofish.h

WIZARD_EXTRA_DIST = \
	wizard/WizardsToolkit-config.in \
	$(WIZARD_MANS) \
	wizard/WizardsToolkit.pc.in


# Install wizard-config_api.h as wizard-config.h
WIZARD_INSTALL_DATA_LOCAL_TARGETS = wizard-install-data-local

# Uninstall wizard-config.h
WIZARD_UNINSTALL_LOCAL_TARGETS = wizard-uninstall-local
TESTS_CHECK_PGRMS = \
	tests/validate

tests_validate_SOURCES = tests/validate.c tests/validate.h
tests_validate_CPPFLAGS = $(AM_CPPFLAGS)
tests_validate_LDADD = $(WIZARD_LIBS)
TESTS_XFAIL_TESTS = 
TESTS_TESTS = \
	tests/validate.sh

TESTS_EXTRA_DIST = \
	tests/common.sh \
	tests/passphrase.txt \
	$(TESTS_TESTS)

TESTS_CLEANFILES = 
UTILITIES_PGMS = \
	utilities/encipher \
	utilities/decipher \
	utilities/cipher-info \
	utilities/keyring \
	utilities/digest

utilities_encipher_LDADD = $(WIZARD_LIBS)
utilities_encipher_LDFLAGS = $(LDFLAGS)
utilities_encipher_SOURCES = \
  utilities/encipher.c \
  utilities/content.c \
  utilities/content.h \
  utilities/utility.c \
  utilities/utility_.h

utilities_decipher_LDADD = $(WIZARD_LIBS)
utilities_decipher_LDFLAGS = $(LDFLAGS)
utilities_decipher_SOURCES = \
  utilities/decipher.c \
  utilities/content.c \
  utilities/content.h \
  utilities/utility.c \
  utilities/utility_.h

utilities_cipher_info_LDADD = $(WIZARD_LIBS)
utilities_cipher_info_LDFLAGS = $(LDFLAGS)
utilities_cipher_info_SOURCES = \
  utilities/cipher-info.c \
  utilities/content.c \
  utilities/content.h \
  utilities/utility.c \
  utilities/utility_.h

utilities_keyring_LDADD = $(WIZARD_LIBS)
utilities_keyring_LDFLAGS = $(LDFLAGS)
utilities_keyring_SOURCES = \
  utilities/keyring.c \
  utilities/content.c \
  utilities/content.h \
  utilities/utility.c \
  utilities/utility_.h

utilities_digest_LDADD = $(WIZARD_LIBS)
utilities_digest_LDFLAGS = $(LDFLAGS)
utilities_digest_SOURCES = \
  utilities/digest.c \
  utilities/content.c \
  utilities/content.h \
  utilities/utility.c \
  utilities/utility_.h


# Tests to run
UTILITIES_TESTS = \
	utilities/tests/encipher.sh \
	utilities/tests/cipher-info.sh \
	utilities/tests/decipher.sh \
	utilities/tests/keyring.sh \
	utilities/tests/digest.sh

UTILITIES_MANS = \
	utilities/encipher.1 \
	utilities/decipher.1 \
	utilities/cipher-info.1 \
	utilities/keyring.1 \
	utilities/digest.1

UTILITIES_CONFIGURE = \
	utilities/encipher.1.in \
	utilities/decipher.1.in \
	utilities/cipher-info.1.in \
	utilities/keyring.1.in \
	utilities/digest.1.in

UTILITIES_EXTRA_DIST = \
	$(UTILITIES_TESTS) \
	utilities/tests/common.sh \
	utilities/tests/passphrase.txt \
	utilities/tests/README.txt

UTILITIES_CLEANFILES = \
	utilities/tests/*.cip \
	utilities/tests/*.rdf \
	utilities/tests/*.txt~ \
	utilities/tests/*.xdm


# Pkgconfig directory
pkgconfigdir = $(libdir)/pkgconfig

# Files to install in Pkgconfig directory
pkgconfig_DATA = \
	$(WIZARD_PKGCONFIG)


# Manual pages to install
man_MANS = \
	$(WIZARD_MANS) \
	$(UTILITIES_MANS)

doc_DATA = \
	LICENSE \
	ChangeLog \
	NEWS.txt

@MAINTAINER_MODE_TRUE@MAINTAINER_TARGETS = wizard-version $(RST2HTML_TARGETS)

# Non-Automake subdirectories to distribute
DISTDIRS = images scripts windows www

#
# Additional install rules
#

# Install HTML files
pkgdocdir = $(DOCUMENTATION_PATH)
DOCDIRS = images www www/api www/api/WizardsToolkit
HTML_INSTALL_DATA_TARGETS = install-data-html

# Uninstall HTML files
HTML_UNINSTALL_DATA_TARGETS = uninstall-data-html
@ZIP_DELEGATE_FALSE@DIST_WINDOWS_SRC_ZIP = 

#
# Build Windows source Zip and 7Zip balls
#
@ZIP_DELEGATE_TRUE@DIST_WINDOWS_SRC_ZIP = $(PACKAGE_NAME)-$(PACKAGE_VERSION)$(PACKAGE_LIB_SUBVERSION)-windows.zip
@P7ZIP_DELEGATE_FALSE@DIST_WINDOWS_SRC_7ZIP = 
@P7ZIP_DELEGATE_TRUE@DIST_WINDOWS_SRC_7ZIP = $(PACKAGE_NAME)-$(PACKAGE_VERSION)$(PACKAGE_LIB_SUBVERSION)-windows.7z

#
# RPM build support
#
@RPM_DELEGATE_TRUE@DIST_ARCHIVE_SRPM = $(distdir)-$(PACKAGE_RELEASE).src.rpm
@RPM_DELEGATE_TRUE@RPMDIR = redhat
@RPM_DELEGATE_TRUE@RPMARCH = i386
@RPM_DELEGATE_FALSE@DIST_ARCHIVE_RPM = 
@RPM_DELEGATE_TRUE@DIST_ARCHIVE_RPM = \
@RPM_DELEGATE_TRUE@	$(RPMDIR)/$(RPMARCH)/$(PACKAGE_NAME)-$(PACKAGE_VERSION)$(PACKAGE_LIB_SUBVERSION)-$(PACKAGE_RELEASE).$(RPMARCH).rpm \
@RPM_DELEGATE_TRUE@	$(RPMDIR)/$(RPMARCH)/$(PACKAGE_NAME)-devel-$(PACKAGE_VERSION)$(PACKAGE_LIB_SUBVERSION)-$(PACKAGE_RELEASE).$(RPMARCH).rpm

all: all-am

.SUFFIXES:
.SUFFIXES: .c .html .lo .log .o .obj .sh .sh$(EXEEXT)
am--refresh:
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/m4/Makefile.am $(srcdir)/config/Makefile.am $(srcdir)/wizard/Makefile.am $(srcdir)/tests/Makefile.am $(srcdir)/utilities/Makefile.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config/config.h: config/stamp-h1
	@if test ! -f $@; then \
	  rm -f config/stamp-h1; \
	  $(MAKE) $(AM_MAKEFLAGS) config/stamp-h1; \
	else :; fi

config/stamp-h1: $(top_srcdir)/config/config.h.in $(top_builddir)/config.status
	@rm -f config/stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config/config.h
$(top_srcdir)/config/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f config/stamp-h1
	touch $@

distclean-hdr:
	-rm -f config/config.h config/stamp-h1
config/configure.xml: $(top_builddir)/config.status $(top_srcdir)/config/configure.xml.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
config/WizardsToolkit.dox: $(top_builddir)/config.status $(top_srcdir)/config/WizardsToolkit.dox.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
wizard.sh: $(top_builddir)/config.status $(srcdir)/wizard.sh.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
utilities/cipher-info.1: $(top_builddir)/config.status $(top_srcdir)/utilities/cipher-info.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
utilities/decipher.1: $(top_builddir)/config.status $(top_srcdir)/utilities/decipher.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
utilities/digest.1: $(top_builddir)/config.status $(top_srcdir)/utilities/digest.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
utilities/encipher.1: $(top_builddir)/config.status $(top_srcdir)/utilities/encipher.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
utilities/keyring.1: $(top_builddir)/config.status $(top_srcdir)/utilities/keyring.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
windows/WizardsToolkit.bat: $(top_builddir)/config.status $(top_srcdir)/windows/WizardsToolkit.bat.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
wizard/version.h: $(top_builddir)/config.status $(top_srcdir)/wizard/version.h.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
wizard/WizardsToolkit-config: $(top_builddir)/config.status $(top_srcdir)/wizard/WizardsToolkit-config.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
wizard/WizardsToolkit.pc: $(top_builddir)/config.status $(top_srcdir)/wizard/WizardsToolkit.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
WizardsToolkit.spec: $(top_builddir)/config.status $(srcdir)/WizardsToolkit.spec.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
	}

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
	done

clean-libLTLIBRARIES:
	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
wizard/$(am__dirstamp):
	@$(MKDIR_P) wizard
	@: > wizard/$(am__dirstamp)
wizard/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) wizard/$(DEPDIR)
	@: > wizard/$(DEPDIR)/$(am__dirstamp)
wizard/aes.lo: wizard/$(am__dirstamp) wizard/$(DEPDIR)/$(am__dirstamp)
wizard/authenticate.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/blob.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/bzip.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/cipher.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/client.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/configure.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/crc64.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/entropy.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/exception.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/file.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/hash.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/hashmap.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/hmac.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/key.lo: wizard/$(am__dirstamp) wizard/$(DEPDIR)/$(am__dirstamp)
wizard/keyring.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/log.lo: wizard/$(am__dirstamp) wizard/$(DEPDIR)/$(am__dirstamp)
wizard/magick.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/md5.lo: wizard/$(am__dirstamp) wizard/$(DEPDIR)/$(am__dirstamp)
wizard/memory.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/mime.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/option.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/passphrase.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/random.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/resource.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/sanitize.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/secret.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/semaphore.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/serpent.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/signature.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/sha1.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/sha224.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/sha256.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/sha384.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/sha512.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/splay-tree.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/string.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/thread.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/timer.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/token.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/twofish.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/utility.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/version.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/wizard.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/xml-tree.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/zip.lo: wizard/$(am__dirstamp) wizard/$(DEPDIR)/$(am__dirstamp)
wizard/nt-base.lo: wizard/$(am__dirstamp) \
	wizard/$(DEPDIR)/$(am__dirstamp)
wizard/libWizardsToolkit.la: $(wizard_libWizardsToolkit_la_OBJECTS) $(wizard_libWizardsToolkit_la_DEPENDENCIES) wizard/$(am__dirstamp)
	$(AM_V_CCLD)$(wizard_libWizardsToolkit_la_LINK) -rpath $(libdir) $(wizard_libWizardsToolkit_la_OBJECTS) $(wizard_libWizardsToolkit_la_LIBADD) $(LIBS)
install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p || test -f $$p1; \
	  then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' `; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

clean-binPROGRAMS:
	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

clean-checkPROGRAMS:
	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
tests/$(am__dirstamp):
	@$(MKDIR_P) tests
	@: > tests/$(am__dirstamp)
tests/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) tests/$(DEPDIR)
	@: > tests/$(DEPDIR)/$(am__dirstamp)
tests/tests_validate-validate.$(OBJEXT): tests/$(am__dirstamp) \
	tests/$(DEPDIR)/$(am__dirstamp)
tests/validate$(EXEEXT): $(tests_validate_OBJECTS) $(tests_validate_DEPENDENCIES) tests/$(am__dirstamp)
	@rm -f tests/validate$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(tests_validate_OBJECTS) $(tests_validate_LDADD) $(LIBS)
utilities/$(am__dirstamp):
	@$(MKDIR_P) utilities
	@: > utilities/$(am__dirstamp)
utilities/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) utilities/$(DEPDIR)
	@: > utilities/$(DEPDIR)/$(am__dirstamp)
utilities/cipher-info.$(OBJEXT): utilities/$(am__dirstamp) \
	utilities/$(DEPDIR)/$(am__dirstamp)
utilities/content.$(OBJEXT): utilities/$(am__dirstamp) \
	utilities/$(DEPDIR)/$(am__dirstamp)
utilities/utility.$(OBJEXT): utilities/$(am__dirstamp) \
	utilities/$(DEPDIR)/$(am__dirstamp)
utilities/cipher-info$(EXEEXT): $(utilities_cipher_info_OBJECTS) $(utilities_cipher_info_DEPENDENCIES) utilities/$(am__dirstamp)
	@rm -f utilities/cipher-info$(EXEEXT)
	$(AM_V_CCLD)$(utilities_cipher_info_LINK) $(utilities_cipher_info_OBJECTS) $(utilities_cipher_info_LDADD) $(LIBS)
utilities/decipher.$(OBJEXT): utilities/$(am__dirstamp) \
	utilities/$(DEPDIR)/$(am__dirstamp)
utilities/decipher$(EXEEXT): $(utilities_decipher_OBJECTS) $(utilities_decipher_DEPENDENCIES) utilities/$(am__dirstamp)
	@rm -f utilities/decipher$(EXEEXT)
	$(AM_V_CCLD)$(utilities_decipher_LINK) $(utilities_decipher_OBJECTS) $(utilities_decipher_LDADD) $(LIBS)
utilities/digest.$(OBJEXT): utilities/$(am__dirstamp) \
	utilities/$(DEPDIR)/$(am__dirstamp)
utilities/digest$(EXEEXT): $(utilities_digest_OBJECTS) $(utilities_digest_DEPENDENCIES) utilities/$(am__dirstamp)
	@rm -f utilities/digest$(EXEEXT)
	$(AM_V_CCLD)$(utilities_digest_LINK) $(utilities_digest_OBJECTS) $(utilities_digest_LDADD) $(LIBS)
utilities/encipher.$(OBJEXT): utilities/$(am__dirstamp) \
	utilities/$(DEPDIR)/$(am__dirstamp)
utilities/encipher$(EXEEXT): $(utilities_encipher_OBJECTS) $(utilities_encipher_DEPENDENCIES) utilities/$(am__dirstamp)
	@rm -f utilities/encipher$(EXEEXT)
	$(AM_V_CCLD)$(utilities_encipher_LINK) $(utilities_encipher_OBJECTS) $(utilities_encipher_LDADD) $(LIBS)
utilities/keyring.$(OBJEXT): utilities/$(am__dirstamp) \
	utilities/$(DEPDIR)/$(am__dirstamp)
utilities/keyring$(EXEEXT): $(utilities_keyring_OBJECTS) $(utilities_keyring_DEPENDENCIES) utilities/$(am__dirstamp)
	@rm -f utilities/keyring$(EXEEXT)
	$(AM_V_CCLD)$(utilities_keyring_LINK) $(utilities_keyring_OBJECTS) $(utilities_keyring_LDADD) $(LIBS)
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

mostlyclean-compile:
	-rm -f *.$(OBJEXT)
	-rm -f tests/tests_validate-validate.$(OBJEXT)
	-rm -f utilities/cipher-info.$(OBJEXT)
	-rm -f utilities/content.$(OBJEXT)
	-rm -f utilities/decipher.$(OBJEXT)
	-rm -f utilities/digest.$(OBJEXT)
	-rm -f utilities/encipher.$(OBJEXT)
	-rm -f utilities/keyring.$(OBJEXT)
	-rm -f utilities/utility.$(OBJEXT)
	-rm -f wizard/aes.$(OBJEXT)
	-rm -f wizard/aes.lo
	-rm -f wizard/authenticate.$(OBJEXT)
	-rm -f wizard/authenticate.lo
	-rm -f wizard/blob.$(OBJEXT)
	-rm -f wizard/blob.lo
	-rm -f wizard/bzip.$(OBJEXT)
	-rm -f wizard/bzip.lo
	-rm -f wizard/cipher.$(OBJEXT)
	-rm -f wizard/cipher.lo
	-rm -f wizard/client.$(OBJEXT)
	-rm -f wizard/client.lo
	-rm -f wizard/configure.$(OBJEXT)
	-rm -f wizard/configure.lo
	-rm -f wizard/crc64.$(OBJEXT)
	-rm -f wizard/crc64.lo
	-rm -f wizard/entropy.$(OBJEXT)
	-rm -f wizard/entropy.lo
	-rm -f wizard/exception.$(OBJEXT)
	-rm -f wizard/exception.lo
	-rm -f wizard/file.$(OBJEXT)
	-rm -f wizard/file.lo
	-rm -f wizard/hash.$(OBJEXT)
	-rm -f wizard/hash.lo
	-rm -f wizard/hashmap.$(OBJEXT)
	-rm -f wizard/hashmap.lo
	-rm -f wizard/hmac.$(OBJEXT)
	-rm -f wizard/hmac.lo
	-rm -f wizard/key.$(OBJEXT)
	-rm -f wizard/key.lo
	-rm -f wizard/keyring.$(OBJEXT)
	-rm -f wizard/keyring.lo
	-rm -f wizard/log.$(OBJEXT)
	-rm -f wizard/log.lo
	-rm -f wizard/magick.$(OBJEXT)
	-rm -f wizard/magick.lo
	-rm -f wizard/md5.$(OBJEXT)
	-rm -f wizard/md5.lo
	-rm -f wizard/memory.$(OBJEXT)
	-rm -f wizard/memory.lo
	-rm -f wizard/mime.$(OBJEXT)
	-rm -f wizard/mime.lo
	-rm -f wizard/nt-base.$(OBJEXT)
	-rm -f wizard/nt-base.lo
	-rm -f wizard/option.$(OBJEXT)
	-rm -f wizard/option.lo
	-rm -f wizard/passphrase.$(OBJEXT)
	-rm -f wizard/passphrase.lo
	-rm -f wizard/random.$(OBJEXT)
	-rm -f wizard/random.lo
	-rm -f wizard/resource.$(OBJEXT)
	-rm -f wizard/resource.lo
	-rm -f wizard/sanitize.$(OBJEXT)
	-rm -f wizard/sanitize.lo
	-rm -f wizard/secret.$(OBJEXT)
	-rm -f wizard/secret.lo
	-rm -f wizard/semaphore.$(OBJEXT)
	-rm -f wizard/semaphore.lo
	-rm -f wizard/serpent.$(OBJEXT)
	-rm -f wizard/serpent.lo
	-rm -f wizard/sha1.$(OBJEXT)
	-rm -f wizard/sha1.lo
	-rm -f wizard/sha224.$(OBJEXT)
	-rm -f wizard/sha224.lo
	-rm -f wizard/sha256.$(OBJEXT)
	-rm -f wizard/sha256.lo
	-rm -f wizard/sha384.$(OBJEXT)
	-rm -f wizard/sha384.lo
	-rm -f wizard/sha512.$(OBJEXT)
	-rm -f wizard/sha512.lo
	-rm -f wizard/signature.$(OBJEXT)
	-rm -f wizard/signature.lo
	-rm -f wizard/splay-tree.$(OBJEXT)
	-rm -f wizard/splay-tree.lo
	-rm -f wizard/string.$(OBJEXT)
	-rm -f wizard/string.lo
	-rm -f wizard/thread.$(OBJEXT)
	-rm -f wizard/thread.lo
	-rm -f wizard/timer.$(OBJEXT)
	-rm -f wizard/timer.lo
	-rm -f wizard/token.$(OBJEXT)
	-rm -f wizard/token.lo
	-rm -f wizard/twofish.$(OBJEXT)
	-rm -f wizard/twofish.lo
	-rm -f wizard/utility.$(OBJEXT)
	-rm -f wizard/utility.lo
	-rm -f wizard/version.$(OBJEXT)
	-rm -f wizard/version.lo
	-rm -f wizard/wizard.$(OBJEXT)
	-rm -f wizard/wizard.lo
	-rm -f wizard/xml-tree.$(OBJEXT)
	-rm -f wizard/xml-tree.lo
	-rm -f wizard/zip.$(OBJEXT)
	-rm -f wizard/zip.lo

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/tests_validate-validate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@utilities/$(DEPDIR)/cipher-info.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@utilities/$(DEPDIR)/content.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@utilities/$(DEPDIR)/decipher.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@utilities/$(DEPDIR)/digest.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@utilities/$(DEPDIR)/encipher.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@utilities/$(DEPDIR)/keyring.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@utilities/$(DEPDIR)/utility.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/aes.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/authenticate.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/blob.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/bzip.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/cipher.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/client.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/configure.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/crc64.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/entropy.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/exception.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/file.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/hash.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/hashmap.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/hmac.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/key.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/keyring.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/log.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/magick.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/md5.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/memory.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/mime.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/nt-base.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/option.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/passphrase.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/random.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/resource.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/sanitize.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/secret.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/semaphore.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/serpent.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/sha1.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/sha224.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/sha256.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/sha384.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/sha512.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/signature.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/splay-tree.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/string.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/thread.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/timer.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/token.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/twofish.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/utility.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/version.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/wizard.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/xml-tree.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@wizard/$(DEPDIR)/zip.Plo@am__quote@

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<

tests/tests_validate-validate.o: tests/validate.c
@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(tests_validate_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tests/tests_validate-validate.o -MD -MP -MF tests/$(DEPDIR)/tests_validate-validate.Tpo -c -o tests/tests_validate-validate.o `test -f 'tests/validate.c' || echo '$(srcdir)/'`tests/validate.c
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) tests/$(DEPDIR)/tests_validate-validate.Tpo tests/$(DEPDIR)/tests_validate-validate.Po
@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='tests/validate.c' object='tests/tests_validate-validate.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(tests_validate_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tests/tests_validate-validate.o `test -f 'tests/validate.c' || echo '$(srcdir)/'`tests/validate.c

tests/tests_validate-validate.obj: tests/validate.c
@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(tests_validate_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tests/tests_validate-validate.obj -MD -MP -MF tests/$(DEPDIR)/tests_validate-validate.Tpo -c -o tests/tests_validate-validate.obj `if test -f 'tests/validate.c'; then $(CYGPATH_W) 'tests/validate.c'; else $(CYGPATH_W) '$(srcdir)/tests/validate.c'; fi`
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) tests/$(DEPDIR)/tests_validate-validate.Tpo tests/$(DEPDIR)/tests_validate-validate.Po
@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='tests/validate.c' object='tests/tests_validate-validate.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(tests_validate_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tests/tests_validate-validate.obj `if test -f 'tests/validate.c'; then $(CYGPATH_W) 'tests/validate.c'; else $(CYGPATH_W) '$(srcdir)/tests/validate.c'; fi`

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
	-rm -rf tests/.libs tests/_libs
	-rm -rf utilities/.libs utilities/_libs
	-rm -rf wizard/.libs wizard/_libs

distclean-libtool:
	-rm -f libtool config.lt
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list=''; test -n "$(man1dir)" || exit 0; \
	{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	test -z "$$files" || { \
	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
install-configlibDATA: $(configlib_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(configlibdir)" || $(MKDIR_P) "$(DESTDIR)$(configlibdir)"
	@list='$(configlib_DATA)'; test -n "$(configlibdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(configlibdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(configlibdir)" || exit $$?; \
	done

uninstall-configlibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(configlib_DATA)'; test -n "$(configlibdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(configlibdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(configlibdir)" && rm -f $$files
install-configshareDATA: $(configshare_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(configsharedir)" || $(MKDIR_P) "$(DESTDIR)$(configsharedir)"
	@list='$(configshare_DATA)'; test -n "$(configsharedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(configsharedir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(configsharedir)" || exit $$?; \
	done

uninstall-configshareDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(configshare_DATA)'; test -n "$(configsharedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(configsharedir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(configsharedir)" && rm -f $$files
install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(docdir)" && rm -f $$files
install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
install-includeHEADERS: $(include_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
	done

uninstall-includeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(includedir)" && rm -f $$files
install-wizardincHEADERS: $(wizardinc_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(wizardincdir)" || $(MKDIR_P) "$(DESTDIR)$(wizardincdir)"
	@list='$(wizardinc_HEADERS)'; test -n "$(wizardincdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(wizardincdir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(wizardincdir)" || exit $$?; \
	done

uninstall-wizardincHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(wizardinc_HEADERS)'; test -n "$(wizardincdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(wizardincdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(wizardincdir)" && rm -f $$files

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

# To be appended to the command running the test.  Handle the stdout
# and stderr redirection, and catch the exit status.
am__check_post =					\
>$@-t 2>&1;						\
estatus=$$?;						\
if test -n '$(DISABLE_HARD_ERRORS)'			\
   && test $$estatus -eq 99; then			\
  estatus=1;						\
fi;							\
TERM=$$__SAVED_TERM; export TERM;			\
$(am__tty_colors);					\
xfailed=PASS;						\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    xfailed=XFAIL;;					\
esac;							\
case $$estatus:$$xfailed in				\
    0:XFAIL) col=$$red; res=XPASS;;			\
    0:*)     col=$$grn; res=PASS ;;			\
    77:*)    col=$$blu; res=SKIP ;;			\
    99:*)    col=$$red; res=FAIL ;;			\
    *:XFAIL) col=$$lgn; res=XFAIL;;			\
    *:*)     col=$$red; res=FAIL ;;			\
esac;							\
echo "$${col}$$res$${std}: $$f";			\
echo "$$res: $$f (exit: $$estatus)" |			\
  $(am__rst_section) >$@;				\
cat $@-t >>$@;						\
rm -f $@-t

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__sh_e_setup);						\
	list='$(TEST_LOGS)';						\
	results=`for f in $$list; do					\
		   read line < $$f && echo "$$line" || echo FAIL;	\
		 done`;							\
	all=`echo "$$results" | sed '/^$$/d' | wc -l | sed -e 's/^[	 ]*//'`; \
	fail=`echo "$$results" | grep -c '^FAIL'`;			\
	pass=`echo "$$results" | grep -c '^PASS'`;			\
	skip=`echo "$$results" | grep -c '^SKIP'`;			\
	xfail=`echo "$$results" | grep -c '^XFAIL'`;			\
	xpass=`echo "$$results" | grep -c '^XPASS'`;			\
	failures=`expr $$fail + $$xpass`;				\
	all=`expr $$all - $$skip`;					\
	if test "$$all" -eq 1; then tests=test; All=;			\
	else tests=tests; All="All "; fi;				\
	case fail=$$fail:xpass=$$xpass:xfail=$$xfail in			\
	  fail=0:xpass=0:xfail=0)					\
	    msg="$$All$$all $$tests passed.  ";				\
	    exit=true;;							\
	  fail=0:xpass=0:xfail=*)					\
	    msg="$$All$$all $$tests behaved as expected";		\
	    if test "$$xfail" -eq 1; then xfailures=failure;		\
	    else xfailures=failures; fi;				\
	    msg="$$msg ($$xfail expected $$xfailures).  ";		\
	    exit=true;;							\
	  fail=*:xpass=0:xfail=*)					\
	    msg="$$fail of $$all $$tests failed.  ";			\
	    exit=false;;						\
	  fail=*:xpass=*:xfail=*)					\
	    msg="$$failures of $$all $$tests did not behave as expected"; \
	    if test "$$xpass" -eq 1; then xpasses=pass;			\
	    else xpasses=passes; fi;					\
	    msg="$$msg ($$xpass unexpected $$xpasses).  ";		\
	    exit=false;;						\
	  *)								\
	    echo >&2 "incorrect case"; exit 4;;				\
	esac;								\
	if test "$$skip" -ne 0; then					\
	  if test "$$skip" -eq 1; then					\
	    msg="$$msg($$skip test was not run).  ";			\
	  else								\
	    msg="$$msg($$skip tests were not run).  ";			\
	  fi;								\
	fi;								\
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  echo "$$msg";							\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for f in $$list; do						\
	    read line < $$f;						\
	    case $$line in						\
	      PASS:*|XFAIL:*);;						\
	      *) echo; cat $$f;;					\
	    esac;							\
	  done;								\
	} >$(TEST_SUITE_LOG).tmp;					\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if test "$$failures" -ne 0; then				\
	  msg="$${msg}See $(subdir)/$(TEST_SUITE_LOG).  ";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    msg="$${msg}Please report to $(PACKAGE_BUGREPORT).  ";	\
	  fi;								\
	fi;								\
	test x"$$VERBOSE" = x || $$exit || cat $(TEST_SUITE_LOG);	\
	$(am__tty_colors);						\
	if $$exit; then							\
	  echo $(ECHO_N) "$$grn$(ECHO_C)";				\
	 else								\
	  echo $(ECHO_N) "$$red$(ECHO_C)";				\
	fi;								\
	echo "$$msg" | $(am__text_box);					\
	echo $(ECHO_N) "$$std$(ECHO_C)";				\
	$$exit

# Run all the tests.
check-TESTS:
	@list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set_logs=; if test "X$(TEST_LOGS)" = X.log; then		\
	  set_logs=TEST_LOGS=;						\
	fi;								\
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) $$set_logs

.log.html:
	@list='$(RST2HTML) $$RST2HTML rst2html rst2html.py';		\
	for r2h in $$list; do						\
	  if ($$r2h --version) >/dev/null 2>&1; then			\
	    R2H=$$r2h;							\
	  fi;								\
	done;								\
	if test -z "$$R2H"; then					\
	  echo >&2 "cannot find rst2html, cannot create $@";		\
	  exit 2;							\
	fi;								\
	$$R2H $< >$@.tmp
	@mv $@.tmp $@

# Be sure to run check first, and then to convert the result.
# Beware of concurrent executions.  Run "check" not "check-TESTS", as
# check-SCRIPTS and other dependencies are rebuilt by the former only.
# And expect check to fail.
check-html:
	@if $(MAKE) $(AM_MAKEFLAGS) check; then			\
	  rv=0; else rv=$$?;					\
	fi;							\
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_HTML) || exit 4;	\
	exit $$rv
recheck recheck-html:
	@target=`echo $@ | sed 's,^re,,'`;				\
	list='$(TEST_LOGS)';						\
	list=`for f in $$list; do					\
	        test -f $$f || continue;				\
	        if read line < $$f; then				\
	          case $$line in FAIL*|XPASS*) echo $$f;; esac;		\
	        else echo $$f; fi;					\
	      done | tr '\012\015' '  '`;				\
	$(MAKE) $(AM_MAKEFLAGS) $$target AM_MAKEFLAGS='$(AM_MAKEFLAGS) TEST_LOGS="'"$$list"'"'
.sh.log:
	@p='$<'; $(am__check_pre) $(SH_LOG_COMPILE) "$$tst" $(am__check_post)
@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; $(am__check_pre) $(SH_LOG_COMPILE) "$$tst" $(am__check_post)

distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__remove_distdir)
dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)
dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@$(am__cd) '$(distuninstallcheck_dir)' \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS check-local
check: check-am
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) $(DATA) \
		$(HEADERS) all-local
install-binPROGRAMS: install-libLTLIBRARIES

installdirs:
	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(configlibdir)" "$(DESTDIR)$(configsharedir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(wizardincdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
	-test -z "$(TEST_LOGS_TMP)" || rm -f $(TEST_LOGS_TMP)
	-test -z "$(TEST_SUITE_HTML)" || rm -f $(TEST_SUITE_HTML)
	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-rm -f tests/$(DEPDIR)/$(am__dirstamp)
	-rm -f tests/$(am__dirstamp)
	-rm -f utilities/$(DEPDIR)/$(am__dirstamp)
	-rm -f utilities/$(am__dirstamp)
	-rm -f wizard/$(DEPDIR)/$(am__dirstamp)
	-rm -f wizard/$(am__dirstamp)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
	clean-libLTLIBRARIES clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf tests/$(DEPDIR) utilities/$(DEPDIR) wizard/$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-libtool distclean-local distclean-tags

dvi: dvi-am

dvi-am:

html-am:

info: info-am

info-am:

install-data-am: install-configlibDATA install-configshareDATA \
	install-data-local install-docDATA install-includeHEADERS \
	install-man install-pkgconfigDATA install-wizardincHEADERS

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am: install-binPROGRAMS install-binSCRIPTS \
	install-exec-local install-libLTLIBRARIES

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf tests/$(DEPDIR) utilities/$(DEPDIR) wizard/$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
	uninstall-configlibDATA uninstall-configshareDATA \
	uninstall-docDATA uninstall-includeHEADERS \
	uninstall-libLTLIBRARIES uninstall-local uninstall-man \
	uninstall-pkgconfigDATA uninstall-wizardincHEADERS

uninstall-man: uninstall-man1

.MAKE: check-am check-html install-am install-strip recheck \
	recheck-html

.PHONY: CTAGS GTAGS all all-am all-local am--refresh check check-TESTS \
	check-am check-html check-local clean clean-binPROGRAMS \
	clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
	clean-libtool clean-local ctags dist dist-all dist-bzip2 \
	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
	dist-zip distcheck distclean distclean-compile \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-local distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-binPROGRAMS install-binSCRIPTS \
	install-configlibDATA install-configshareDATA install-data \
	install-data-am install-data-local install-docDATA install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-local \
	install-html install-html-am install-includeHEADERS \
	install-info install-info-am install-libLTLIBRARIES \
	install-man install-man1 install-pdf install-pdf-am \
	install-pkgconfigDATA install-ps install-ps-am install-strip \
	install-wizardincHEADERS installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	maintainer-clean-local mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	recheck recheck-html tags uninstall uninstall-am \
	uninstall-binPROGRAMS uninstall-binSCRIPTS \
	uninstall-configlibDATA uninstall-configshareDATA \
	uninstall-docDATA uninstall-includeHEADERS \
	uninstall-libLTLIBRARIES uninstall-local uninstall-man \
	uninstall-man1 uninstall-pkgconfigDATA \
	uninstall-wizardincHEADERS

wizard-install-data-local:
	$(mkinstalldirs) $(DESTDIR)$(wizardincdir)
	$(INSTALL_HEADER) wizard/wizard-config.h $(DESTDIR)$(wizardincdir)/wizard-config.h
wizard-uninstall-local:
	rm -f $(DESTDIR)$(wizardincdir)/wizard-config.h

all-local: $(BZIP_LOCAL_TARGETS) $(ZIP_LOCAL_TARGETS) $(MAINTAINER_TARGETS)

install-exec-local:

install-data-local: $(WIZARD_INSTALL_DATA_LOCAL_TARGETS) $(HTML_INSTALL_DATA_TARGETS)

uninstall-local: $(WIZARD_UNINSTALL_LOCAL_TARGETS) $(HTML_UNINSTALL_DATA_TARGETS)

clean-local: 

distclean-local: 

maintainer-clean-local: 

check-local: 

drd:
	$(MAKE) MEMCHECK='valgrind --tool=drd --check-stack-var=yes --var-info=yes --quiet $(VALGRIND_EXTRA_OPTS)' check

helgrind:
	$(MAKE) MEMCHECK='valgrind --tool=helgrind --quiet $(VALGRIND_EXTRA_OPTS)' check

memcheck:
	$(MAKE) MEMCHECK='valgrind --tool=memcheck --quiet $(VALGRIND_EXTRA_OPTS)' check

ptrcheck:
	$(MAKE) MEMCHECK='valgrind --tool=exp-ptrcheck --quiet $(VALGRIND_EXTRA_OPTS)' check
dist-hook:
	( \
	  builddir=`pwd` ; \
	  cd $(srcdir) && \
	  ( \
	    for dir in $(DISTDIRS) ; do \
	      find $$dir -depth -print | egrep -v '(~$$)|(/CVS)|(/\.#)|(/\.deps)|(/\.svn)' \
	        | cpio -pdum $$builddir/$(distdir) 2> /dev/null ; \
	    done \
	  ) \
	)
install-data-html:
	$(mkinstalldirs) $(DESTDIR)$(pkgdocdir)
	$(INSTALL_DATA) $(srcdir)/index.html $(DESTDIR)$(pkgdocdir)
	@for dir in $(DOCDIRS) ; do \
	  $(mkinstalldirs) $(DESTDIR)$(pkgdocdir)/$$dir && \
	  for file in $(srcdir)/$$dir/*.* ; do \
	    echo "$(INSTALL_DATA) $$file $(DESTDIR)$(pkgdocdir)/$$dir" ; \
	    $(INSTALL_DATA) "$$file" $(DESTDIR)$(pkgdocdir)/$$dir ; \
	  done ; \
	done
uninstall-data-html:
	rm -f $(DESTDIR)$(pkgdocdir)/index.html
	for dir in $(DOCDIRS) ; do \
	  rm -f -r $(DESTDIR)$(pkgdocdir)/$$dir ; \
	done

# Ensure that version.h at $(srcdir)/wizard/version.h is kept up to date.
wizard-version: wizard/version.h
	@if test -f "$(srcdir)/windows/installer/scripts/version.isx.in" ; then \
	  ./config.status --file="$(srcdir)/windows/installer/scripts/version.isx" 2> /dev/null ; \
	fi
	@if test -n "$(VPATH)" ; then \
	  cmp wizard/version.h $(srcdir)/wizard/version.h > /dev/null ; \
          if test $$? -eq 1 ; then \
	    echo "Updating $(srcdir)/wizard/version.h ..."; \
	    cp wizard/version.h $(srcdir)/wizard/version.h ; \
	  fi ; \
	fi ; \
	touch wizard-version

${srcdir}/configure: ${srcdir}/version.sh
libtool: $(LIBTOOL_DEPS)
	$(SHELL) ./config.status --recheck

# Format C API documentation
html:
	doxygen config/WizardsToolkit.dox
$(DIST_WINDOWS_SRC_ZIP) $(DIST_WINDOWS_SRC_7ZIP) windows-dist:
	if test -d $(PACKAGE_NAME)-$(PACKAGE_VERSION)$(PACKAGE_LIB_SUBVERSION) ; then \
	  chmod -R u+w $(PACKAGE_NAME)-$(PACKAGE_VERSION)$(PACKAGE_LIB_SUBVERSION) ; \
	  rm -rf $(PACKAGE_NAME)-$(PACKAGE_VERSION)$(PACKAGE_LIB_SUBVERSION) ; \
	fi
@ZIP_DELEGATE_TRUE@	rm -f $(DIST_WINDOWS_SRC_ZIP)
@ZIP_DELEGATE_TRUE@	$(ZIP) -r -9 -q  $(DIST_WINDOWS_SRC_ZIP) $(PACKAGE_NAME)-$(PACKAGE_VERSION)$(PACKAGE_LIB_SUBVERSION)
@P7ZIP_DELEGATE_TRUE@	rm -f $(DIST_WINDOWS_SRC_7ZIP)
@P7ZIP_DELEGATE_TRUE@	$(P7ZIP) a -t7z -mx=9 $(DIST_WINDOWS_SRC_7ZIP) $(PACKAGE_NAME)-$(PACKAGE_VERSION)$(PACKAGE_LIB_SUBVERSION)
@P7ZIP_DELEGATE_TRUE@	chmod 644 $(DIST_WINDOWS_SRC_7ZIP)
	rm -rf $(PACKAGE_NAME)-$(PACKAGE_VERSION)$(PACKAGE_LIB_SUBVERSION)
@RPM_DELEGATE_TRUE@.PHONY: srpm
@RPM_DELEGATE_TRUE@$(DIST_ARCHIVE_SRPM) srpm: dist
@RPM_DELEGATE_TRUE@	rm -f $(DIST_ARCHIVE_SRPM)
@RPM_DELEGATE_TRUE@	$(RPM) --define="_sourcedir `pwd`" --define="_srcrpmdir `pwd`" --nodeps --bs WizardsToolkit.spec
@RPM_DELEGATE_TRUE@	@echo ==============================================================
@RPM_DELEGATE_TRUE@	@echo $(DIST_ARCHIVE_SRPM) is ready for distribution.
@RPM_DELEGATE_TRUE@	@echo ==============================================================

@RPM_DELEGATE_TRUE@.PHONY: rpm
@RPM_DELEGATE_TRUE@rpm:
@RPM_DELEGATE_TRUE@	rm -rf $(RPMDIR)
@RPM_DELEGATE_TRUE@	mkdir $(RPMDIR)
@RPM_DELEGATE_TRUE@	mkdir $(RPMDIR)/BUILD
@RPM_DELEGATE_TRUE@	mkdir $(RPMDIR)/RPMS
@RPM_DELEGATE_TRUE@	$(MAKE) distcheck
@RPM_DELEGATE_TRUE@	$(RPM) --define="_sourcedir `pwd`" --define="_rpmdir `pwd`/$(RPMDIR)/RPMS" --define="_builddir `pwd`/$(RPMDIR)/BUILD" --nodeps -bb WizardsToolkit.spec
@RPM_DELEGATE_TRUE@	rm -rf rpmbuild
@RPM_DELEGATE_TRUE@	@echo ==============================================================
@RPM_DELEGATE_TRUE@	@echo $(DIST_ARCHIVE_RPM) is ready for distribution.
@RPM_DELEGATE_TRUE@	@echo ==============================================================

#
# Build a validated snapshot release and move to the snapshots directory.
#
snapshot: distcheck
	$(MAKE) $(DIST_ARCHIVE_SRPM)
	$(MAKE) $(DIST_WINDOWS_SRC_ZIP)
	mv $(DIST_ARCHIVES) $(DIST_WINDOWS_SRC_ZIP) $(DIST_ARCHIVE_SRPM) /var/ftp/pub/WizardsToolkit/beta/

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: